VR-ROLLER

PREMIUM & HIGH PERFORMANCE COMPACTION ROLLER

+80hpPower

7,00-11,00mWorking width

3600/5600kgWeight

"Built to last"

Great working capacity

The VR-ROLLER, a premium range roller designed for the toughest and most demanding tasks. With working widths ranging from 7 to 11 meters, it's known for its even weight distribution and terrain adaptability. It also offers a high level of consolidation and compaction, which is hard to match. The large roller diameter enhances rolling effect, making it less sensitive to weight, thus requiring lower power requirements and allowing for higher operating speeds. In the field, the rear position of the wheels provides excellent maneuverability in small fields and helps alleviate roller weight in light or soft areas

Singular Design

The design of the VR-Roller is distinctive in several aspects. The most visible part is a central monocoque frame, unique in its class, very robust, and integrating all the elements, but there is much more. The hydraulic opening system "forward" brings the roller closer to the tractor, making it more maneuverable, and no hydraulic element bears the load in the field. In transport, there are only advantages; the center of gravity is low, and the weight is centered, so the tractor does not bear much weight. The central wheels contribute to maneuverability.

Thinking of Field Professionals

Like all Vomer machinery, the VR-ROLLER roller is manufactured with high-strength steels and incorporates highly reliable components, minimizing adjustments and maintenance.

Sealed high-capacity bearings provide the assurance of continuous operation without breakage. The high-quality steel used to construct the tube ensures that even with thinner walls, there are no deformations or breakages, even in rocky terrain.

01.

Highly robust monocoque frame, designed for tough and continuous operations. Fully hydraulic opening.

_______________________________________________________________________________________________________________________________

02.

It perfectly adapts to the terrain, with an intelligent design that efficiently distributes weight on the ground.

_______________________________________________________________________________________________________________________________

03.

The independent movement of the wheels allows lifting the roller completely for maneuvers.

_______________________________________________________________________________________________________________________________

EQUIPMENTS

TUBE 650 TUBE 750 TUBE 650/750 + RINGS RAPTOR 750 TRACK ERADICATORs STONE BOX

TUBE 650

The flat road roller in Ø650 is used for growing crops, after the sowing of the alfalfa, fodder and cereal, and its also used in other labour during autumn or spring. As it doesn’t have the cultivation capability, this type of roller is highly appropriate for rock terrains, as their smooth surface covers the rocks and decreases the risk of damages.

This type of rollers offers the possibility of changing the total weight allowing the filling of the internal part of water (up to 1/3). The tube is built on high durability steel in 12mm thickness, with an axis of Ø60mm (Ø70mm from10,00m) and wheel on oscillating bearings of high capacity.

*Cleaning elements are optional for this type of roller.

TUBE 750

The flat road roller is used for compaction of light terrain where there needs to be a more thorough cover of rocks. These flat road rollers in Ø750 have a higher rolling capacity, translated in a substantial decrease of dragging effect and a decrease on fuel consumption.

*Cleaning elements are optional for this type of roller.

TUBE 650/750 + RINGS

The compactor tube with rings is designed for a consolidation and compaction effect, and at the same time leaving small furrows on the surface. These small furrows help to locate rain water, and even avoid its sliding. The rings help breaking the superficial scab, after the grower or after the sowing.

The 20mm diameter rings, are located uniformly at a distance of between 20 and 25cm depending on the model.

RAPTOR 750

Compactor roller with flat tube in Ø650mm and a longitudinal groove of angular type. With external diameter of 750mm, this roller is suitable for heavy consolidation and cultivation tasks. The aggressive profile is optimal for breaking and movement of the superficial terrain, and it merely damages the plant when it is used after the cultivation process. As the weight is superior to all the other models of flat tube, it is also recommended for extra consolidation labour

TRACK ERADICATORs

Front track cleaning system of hidraulic activation that decreases the effect of the tractor track before the roller. It is purely hidraulic which allows for a variation of the depth work. On cultivated terrains it must be put on the highest position.

Regulation of the position of the track cleaning system that adapts to all width of tractors and all width of wheels.

The leaf spring type arms minimize the damage and allow for high-performance.

STONE BOX

Box for the collection of stones that are sometimes found in the field and that due to their size it is convenient to remove it. The stone boxes are placed in the lateral sections, incorporate a simple tilting system that make the extraction of the stones more easy.

OSCILANTING SYSTEM

The roller is divided in 3 sections, which oscillate independently. This configuration achieves a continuous compaction, avoiding the scalling of other systems. The lateral sections incorporate a horizontal oscillating axis displaced from the central position. The central section oscillates vertically and horizontally, which guarantees the best contact with the terrain and avoids possible dragging. All the elements of the system are manufactured in high durability steel and require low maintenance.

WEIGHT DISTRIBUTION

As indicated, a homogeneous consolidation is fundamental for the growing conditions of all plants, that is why the design of the VR-ROLLER is focused on a good distribution to make uniform pressure on the terrain.

In an analysis of the rollers with hydraulic opening, a V weight distribution is obtained, where the central area supports the majority of the weight, so it over-consolidates in that area increasing also the dragging risk. The main problem lies in distributing all the weight on the chassis, the wheels and other elements, on the terrain in a homogeneous manner. Even more, our exclusive SHOX system makes it for the ideal weight distribution, completely plain.